What we repair · Wayland, MA
Ice Maker Repair
Ice production inside built-in refrigeration and in standalone undercounter machines, including the supply valve, fill tube and harvest mechanism.
In the caller's words
How it usually gets described
- The bin filling slowly and then stopping altogether
- Cubes coming out small and hollow
- Ice tasting of whatever else is in the freezer
- The fill valve buzzing without water arriving
On the visit
What gets measured
- Water pressure and fill volume at the valve
- Fill tube for a freeze-back, which is what most slow bins turn out to be
- Harvest mechanism and the ejector through a manual cycle
- Mould thermistor readings against the harvest point
- Bin level sensing, and whether the bin is simply sitting proud
Also on the van
How a call runs
Three stages, in this order
-
First
The model plate, and what it is doing
The plate lives inside the fresh food compartment on most built-ins, on the upper left wall. That number plus a plain description of the fault settles which platform, which sealed system and which parts ride out on the van.
-
Second
Readings taken at the cabinet
Compartment temperatures against the set point, evaporator and condenser behaviour, fan draw, drain path, door seal and hinge alignment. What the display claims is a data point, not a diagnosis.
-
Third
A number before anything is opened
Parts and labour quoted as one figure, and an honest answer about whether the repair is worth doing at all. Nothing gets dismantled on the strength of a guess.
What it costs
One fixed figure, and a range for the rest
$95 flat service call
It covers the visit and the full diagnosis, and it comes off the bill in full if you approve the repair. Everything beyond it is quoted before anything is dismantled.
| Door gasket or seal replacement | $280 – $750 |
|---|---|
| Evaporator or condenser fan motor | $310 – $650 |
| Defrost heater, thermostat or sensor | $280 – $660 |
| Ice maker, water valve or supply line | $300 – $690 |
| Electronic control board | $520 – $940 |
| Compressor or sealed-system repair | $990 – $2,170 |
For comparison, replacing a comparable built-in runs $7,920 to $19,710 for the appliance alone, before delivery, fitting or panel work. That gap is why most of these repairs are still worth doing.
Reviews
On ice maker repair
5out of 5from 798 reviews
The fill valve buzzed away but no water ever arrived. He checked pressure at the shutoff under the sink first and found it left half closed after a plumbing visit last month. He opened it, tested the valve anyway to be sure, and told me what to look at before calling anyone.
Ansel G.Natick
The bin filled slowly and then stopped altogether. He measured the fill and found the inlet screen almost solid with mineral scale. Cleaned it out, replaced the valve, and the harvest rate went back to normal.
Ottilie J.Wayland
Cubes small and hollow. Fill tube part frozen and the mould heater weak, so harvests never completed. Heater replaced, tube reseated, full size cubes since.
Delphine A.Concord
Ready when you are
A ice maker repair call in Wayland starts with the model number.
(508) 785-6498Answered 24/7. On the road 8:00 am – 8:00 pm, seven days. Flat $95 service call, credited against an approved repair.